3.3 Top rod mounts
Parts
| Part | Location | Info |
|---|---|---|
| M4 x 10mm Quantity: 4 |
Layer: 3 Box: VZ330 Box 6 |
|
| M4 x 20mm Quantity: 4 |
Layer: 3 Box: VZ330 Box 6 |
|
| M4 t-nut Quantity: 4 |
Layer: 3 Box: VZ330 Box 6 |
|
| Top rod mount Quantity: 4 |
Layer: 1 |  |
Step 1
Required
• Box 6 - M4 - 8/16
 |
| Part | Location |
|---|---|
| Top rod mount Quantity: 4 |
Layer: 1 |
| M4 x 20mm Quantity: 4 |
Layer: 3 Box: VZ330 Box 6 |
 |
• Screw in the M4 x 20mm screw to all Top rod mounts |
Step 2
Required
• Box 6 - M4 x 10mm
• Box 6 - M4 t-nut
 |
| Part | Location |
|---|---|
| Top rod mount Quantity: 4 |
Layer: 1 |
| M4 x 10mm Quantity: 4 |
Layer: 3 Box: VZ330 Box 6 Bag: M4 Bagnumber: 4/16 |
| M4 t-nut Quantity: 4 |
Layer: 3 Box: VZ330 Box 6 Bag: M4 Bagnumber: 2/16 |
 |
• Screw in the M4 x 10mm screw with the t-nut to all top rod mounts |
Step 3
Follow these steps once for each of all four mounts
 |
| Part | Location |
|---|---|
| Top rod mount Quantity: 4 |
Part from step 2 |
 |
• But the top rod mounts over the rod • Attach the top part to the extrusion • Tighten the M4x20mm screw |
Step 4
Follow these steps once for each of all four mounts
 |
| Part | Location |
|---|---|
| Top rod mounts Quantity: 4 |
Part from step 2 |
 |
• Now that the top rod mounts are mounted to the extrusion tighten the M4 x 20mm screws to secure the rods to the mounts |